How To Use

To Get Recharged!

(1) Place a rubber or plastic mat on the floor, then put a plastic chair or wooden chair on it

(2) Place the chair far away from the walls

(2) Place the chair far away from the walls

(3) Place a rubber or plastic mat under the machine

(4) Plug in the cable

(5) Plug the 1.5 meter cable into the machine and clip it on the metal mesh pad (please take precaution, this cable MUST NOT touch the ground)

(6) Place the metal mesh pad on a plastic chair

(7) Sit on the plastic chair

(8) Put your both legs on the metal mash pad at the same time (DO NOT have one foot on the ground and another in the metal mash pad or you will get a mild electric shock)

(9) Do not touch anyone while you are on treatment as it will cause a mild electrocution

(9) Do not touch anyone while you are on treatment as it will cause a mild electrocution

Watch Video Tutorial

What to do after you end your electrotherapy session?

(1) Remove your both legs at the same time

(2) Unplug the unit’s AC power line cord from the wall outlet or turn off the power extension bar if you’re using one.

(3) Using the Discharge Cable (hold only the plastic insulated handle), touch the black plug to the black jack (Discharger/Ground) at the front of the unit.

(4) Then, tap the red plug to the red jack (labeled “High Voltage Discharger”) at the back of the unit repeatedly until the spark is gone. Do not attempt to touch it to the Output High Voltage terminal!

Note: You do not need to fully insert the plugs. You simply just have to make a metal-to-metal contact (a short circuit).

Get Recharged For Longer Life!